Like a flashing led to solve on a Samsung camera

Print this ArticleErrors can cause a LED on the Samsung camera, but the light can occur even under normal operating conditions. The self-timer and camera status lamp are LEDs a closer look value. Extending the life-cycle camera by understanding, which means that each flashing LED. Then you can make the necessary adjustments, if required are.

Related queries: difficulty: EasyInstructions self timer light LED1

Check whether flashes the hour-and 10 seconds symbol for eight seconds. This means that the self timer function and prepares the camera to take a picture.

2

It is important to confirm that for the last two seconds the watch and two-seconds symbol flashes. It will blink quickly the camera at 0.25 seconds for the final two seconds, when the self-timer is and prepared, to take a picture

3

Whether the dual watch icon blinks for 10 seconds. This indicates that the camera on the first recording to make. After two seconds, a second image will be recorded.

4

Confirm that the topic within the detection range is 2.5 meter face when the self-timer lamp LED blinks always even constantly. Usually, the self-timer lamp LED located on the front of the camera to the Flash page.

5

You will find if you set the motion timer the Timer light constantly blinks LED every second and you simply pressed the shutter button.

6

Make sure that the issue will not move if the self-timer lamp LED flashes continuously every 0.25 seconds. This will occur if the camera focus moves on a topic and the topic.

Camera status lamp LED1

Make sure, that you turn on the camera within 30 seconds, if the camera lamp LED starts to blink. In this case the LCD turns off automatically and the camera switches to standby mode. Wait until it stops flashing, and press the power button to turn on the camera again. The camera lamp LED is usually located on the back of the camera, on the right side of the LCD.

2

Let the camera status lamp LED will flash if you enable only the camera and it turns itself back to exit. The Flash battery can be recharged or data may be in the process of transferring to your PC. The LCD turns off automatically, if this the case.

3

Check the status of the printer if the camera lamp LED blinking status further. This can occur when data is sent from the camera to the printer.

4

Check whether your camera on the subject is aligned, if you try to take a picture and the camera is constantly flashing status LED lamp.

Tips & warnings

Although it may not directly a part of the camera, the battery indicator on the AC charger light to blink. Check whether the battery is inserted correctly in the charger when charging LED blinks or is an orange color. Reset the batteries so that the polarity match the placement in the battery bay. Confirm that during the loading process, so it'll take a full charge camera is turned off.

The memory card can be damaged if status lamp LED flashes the camera and the card is removed from the camera. To avoid damage to the memory card, you wait until the camera status lamp LED stops blinking before you remove.

Suggest article

Related SearchesReferencesSamsung: Samsung SL50 user ManualResourcesSamsung: Samsung SupportRead continue:

Print this ArticleCommentsFollow eHowFollow